Spiropress Multicontrol MCM-M5-6.2-twin
Description
SpiroPress Multicontrol MAXI MCM-M5-6.2-TWIN
Maxi: 2 pumps for 100% of the expansion flow each / 2 expansion valves – For 100% of the expansion flow each
Max Upper working pressure: 2.4 – 6.2 bar
Nominal Pressure (PN): 16 bar
To be used with the EP range of vessels; 500L through to 10,000 litre. Additional vessels may be supplied as “master” vessels to duplicate controls and sensors and provide greater back up and protection of the system.
Permanent operating temperatures
Features:
• 2 Pumps each 100 of the expansion flow
• 2 expansion valves for 100% of the expansion flow each
• Integration of Control Unit and expansion vessel.
• Built in discharge hopper for connection of safety/drainage pipes
• Expandable signally possible with optional Analogue or Binary communication modules.
• SMS module option for remote operation and interrogation
• Proportional to plant, pressure regulating valve
• Built in temperature protection to vessel to prevent membrane exposure to excessive temperatures.
• Spring operated expansion valve provide protection to plant against high pressures even in the event of electrical failure
• Can be used on permanent High temperature applications in excess of 100°C with the inclusion of an Intermediate vessel and additional High temperature safety kit.
Product Range Information
SpiroPress Multicontrol Range MCM Maxi Twin
Maxi: 2 pumps for 100% of the expansion flow each / 2 expansion valves – For 100% of the expansion flow each
This Pump Controlled Pressurisation Station is designed to keep the plant the operating within a close working range – typically +/-. 5bar.
Sealed membrane vessel prevents any Oxygen contamination. Fully expandable control modules provide optional multiple signalling for High/Low pressure alarms, refill functions, remote stop / start, Common alarm, pump run, pump change over etc.
Left or right-hand connections possible for all mechanical & electrical supplies.
To be used with the EP range of vessels – 500L through to 10,000 litre. Additional vessels may be supplied as “master” vessels to duplicate controls and sensors and provide greater back up and protection of the system.
Permanent operating temperatures in excess of 100°C possible with the inclusion of Intermediate vessels and additional High temperature safety kit.
Various units available to cover working range up to 16 bar
Features:
• Integration of Control Unit and expansion vessel.
• 2 Pumps each capable of 100% of the expansion flow.
• Twin Expansion Valves each capable of 100% expansion flow provides a built-in second fail-safe overflow valve, which is switched manually in case of fault.
• Energy efficient and energy saving due to load distribution to two pumps.
• Built in discharge hopper for connection of safety/drainage pipes
• Expandable signally possible with optional Analogue or Binary communication modules.
• SMS module option for remote operation and interrogation
• Proportional to plant, pressure regulating valve
• Built in temperature protection to vessel to prevent membrane exposure to excessive temperatures.
• Spring operated expansion valve provide protection to plant against high pressures even in the event of electrical failure
• Optional integrated refill module.